| 中文版 English

具体要求

其它要求

-
关闭
Gürtelgarnitur aus Silber, sasanidisch, spätes 6. - frühes 7. Jhdt.
德国
2023年05月06日 开拍 / 2023年05月04日 截止委托
拍品描述 翻译
Gürtelgarnitur aus Silber, sasanidisch, sp?tes 6. - frühes 7. Jhdt. Satz von silbernen Gürtelbeschl?gen aus 13 Teilen: 1) Ein zungenf?rmiger Endbeschlag vom Hauptriemen. H?he ca. 5 mm, hohl gearbeitet. Auf der Vorderseite eine Wellenranke mit Bl?ttern und Trauben innerhalb der von den Ranken eingerahmten Felder. In den mittleren drei Feldern zus?tzlich V?gel, die an Trauben picken. Auf der Rückseite sichelf?rmige Stempel. Die Seitenteile in voller L?nge erhalten, das obere Ende der Bleche von Schau- und Rückseite etwas ausgebrochen. Im Inneren erhaltene, originale Lederreste, durch die noch eine Silberniete gesteckt ist, die den Lederriemen an der Riemenzunge fixierte. L?nge 9,3 cm, Gewicht 21,93 g. 2) Eine Gürtelschnalle, durch die der Hauptriemen gezogen werden konnte. Massiver, vorne eingezogener Schnallenbügel, hinten durch zwei rückw?rts gebogene Forts?tze verst?rkt. Um einen rundstabigen, schmalen Steg auf der rückw?rtigen Seite der Schnalle ist eine Riemenzwinge zur Befestigung am anderen Ende des Hauptriemens mit schmalem, rechteckigem Beschlag gebogen, in dessen Mitte sich ein Nietloch zur Befestigung befindet. Zwischen den beiden Klammern der Riemenzwinge der facettierte Schnallendorn mit deutlich abgesetzter, quaderf?rmiger Dornbasis. L?nge 4,6 cm, Gewicht 18,86 g. 3) Eine kleine, unten abgerundete Nebenriemenzunge. Hohl gearbeitet und auf dem Rand der Vorderseite und ringsum an der Oberkante durch ein profiliertes Blechband verziert. Breite ca. 4,5 mm. Knapp unterhalb des Randes zwei Nieten zur Fixierung am Nebenriemen, von dem Lederreste im Inneren erhalten sind. L?nge 2,8 cm (ohne überstehende Lederreste), Gewicht 3,99 g. 4) Zehn gleichartig gefertigte, runde Beschl?ge bestehend aus einem Blech auf der Schauseite, auf dem von hinten her über mindestens zwei verschiedene Modelle die Büste einer Person getrieben worden ist, einer Einrahmung der Schauseite am Rand durch zwei Bahnen verzwirnter Dr?hte, einem ca. 5 mm hohen Randblech und in der Regel zweier am oberen und unteren Rand, sowie der Rückseite des Schaublechs verl?teter ?sen, die aus einem umgebogenen, dicken Draht bestehen. Bei zwei Beschl?gen sind eine bzw. beide ?sen verloren. Ein Beschlag hat abweichend drei ?sen: zwei seitliche und eine untere. Die Büsten sind auf der Vorderseite mit Variationen bei Gewand und Frisur nachziseliert. Insbesondere die Gew?nder sind teils deutlich unterschiedlich gestaltet. Bei mehreren Beschl?gen sind Lederreste erhalten. Durchmesser der Beschl?ge ca. je 2,7 bis 2,8 cm. Gewichte zwischen 6,59 g (?sen abgebrochen) und 9,84 g (mit Lederresten). Ausgesprochen seltene und interessante Beschl?ge vom Gürtel eines sasanidischen Würdentr?gers. Provenienz: Rheinische Privatsammlung, übernommen aus dem Besitz des Vaters A set of Sasanian belt fittings made of silver, late 6th – early 7th century A set of Sasanian belt fittings made of silver, late 6th – early 7th century The set of silver belt fittings comprising 13 elements: 1) A tongue-shaped end piece of the main strap. Height approx. 5 mm, hollow wrought. On the front, an undulating tendril with leaves and grapes inside the fields created by the tendrils. In addition, the three central fields with birds pecking at the grapes. A sickle-shaped stamp on the back. The entire length of the side elements have survived, the upper edge of the metal plaques broken away slightly on the front and back. Remnants of the original leather backing on the inside, through which a silver rivet that fastened the leather strap to the strap end is still inserted. Length 9.3 cm, weight 21.93 g. 2) A belt buckle through which the main strap could be drawn. The solid buckle frame slightly constricted at the front, reinforced on the inside with two appendages bent backwards. A strap holder with a tapered, rectangular fitting is folded around a narrow, circular bar on the back of the buckle to attach it on the other end of the main strap. A rivet hole in the middle of the strap holder to fasten the belt. The faceted prong with a prominent, offset prong base set between the two clasps of the strap holder. Length 4.6 cm, weight 18.86 g. 3) A small side strap end, rounded at the bottom. Hollow wrought, decorated with a contoured metal band on the front edge and around the upper border. Width approx. 4.5 mm. Just below the edge, two rivets to attach it to the strap for the belt hangers, with remnants of the leather backing. Length 2.8 cm (without the protruding leather backing), weight 3.99 g. 4) Ten identical, circular fittings, comprising a metal plaque on the front, on which the bust of a person has been hammered from the back on at least two different models, two rows of twisted wire forming a frame around the edge of the front, a metal border of approx. 5 mm, and two in most cases on each of the upper and lower edges, along with loops soldered on the back of the front metal plaque, made of thick wire, bent into a circle. One and both loops have been lost on two fittings. Unusually, one fitting has three loops, two on the side and one at the bottom. The busts have been chased on the front with variations on the garments and hairstyle. In particular, the robes are obviously different in some cases. Remnants of the leather backing on several fittings. Diameter of the fittings approx. 2.7 to 2.8 cm. Weighing between 6.59 g (loop broken off) and 9.84 g (leather backing in place). Exceptionally rare and interesting set of fittings from a belt worn by a Sasanian dignitary. Provenance: From a private Rhenish collection, inherited from the consignor's father. Condition: II

本场其它拍品

  • 竞价阶梯
  • 快递物流
  • 拍卖规则
  • 支付方式
竞价区间 加价幅度
0
10
100
50
500
100
1,000
200
2,000
250
5,000
500
10,000
1,000
20,000
2,000
50,000
5,000
100,000
10,000
+

价格信息

拍品估价:无 起拍价格:3,000 欧元  买家佣金: 25.00% + VAT

拍卖公司

Hermann Historica GmbH
地址: Bretonischer Ring 3 85630 Grasbrunn / Munich GERMANY
电话: +49 (0) 89-5472649-0
邮编: 80335
向卖家提问

小贴士

1. 一般拍卖公司接受的付款方式有以下几种:
现金、信用卡、转账汇款、银行支票、个人支票以及PayPal支付。
使用PayPal支付时,请留意需要在账单金额的基础上额外加上 4% 的手续费。
2. 信用卡的种类有以下几种:
3. 转账汇款时请注意银行手续费
海外拍企会要求足额到账,所以请您在汇款时,选择足额到账,或在汇款金额的基础上加上汇款手续费(如25美金)。
4. 国际转账汇款时, 您需要知道海外拍卖行以下汇款信息:
* 收款人名称
* 收款人地址
* 收款人银行账号
* 收款银行国际编码(8位字母数字组合,必填项, 如: BFKKAT2K)
* 收款银行清算码(9位数字组合,选填项)
* 收款银行名称
* 收款银行地址
5. 运输相关事项
有的海外拍卖行会替您安排和协调运输, 您只需要支付相关的运费及保险费(如您需要)即可;有的海外拍卖行会推荐几家长期合作的运输公司, 这些运输公司有着良好的信誉和高质量的工作效率,您大可放心。您只需要提供您的收货地址, 竞得拍品账单。 运输公司会根据您提供的信息给您报价, 您可以在其中选择最优的报价者来承担运输任务。然后就是付款了, 信用卡是最常用的支付手段, 当然还有其他像PayPal,转账等。
6. 进口通关可能出现的关税
国际运送的包裹在进口清关过程中如需支付关税,需由包裹接受人(即买家)自行承担。 征收标准:具体征收标准和额度以海关通知和解释为准。
7. 禁拍拍品
海外拍卖会可能会出现中国法律禁止交易的物品,如枪支、管制刀具、象牙、犀角等;中国买家不得通过本平台参与上述物品的拍卖活动;任何情形下,买家均须对自己的竞拍行为独立承担责任。
服务热线:400-608-1178
查看全部小贴士