| 中文版 English

具体要求

其它要求

-
关闭
Römischer Bronzehelm vom Typ Niederbieber, 3. Jhdt. n. Chr.
德国
2023年05月06日 开拍 / 2023年05月04日 截止委托
拍品描述 翻译
R?mischer Bronzehelm vom Typ Niederbieber, 3. Jhdt. n. Chr. Aus einem Stück getriebene bronzene Kalotte, seitlich mit markant ausgestellten und abgesetzten Ohrenausschnitten, das Hinterteil tief nach unten gezogen und mit leicht schr?g nach unten geneigtem Nackenschutz versehen. Der Nackenschutz am Rand mit starken Ausbrüchen, die Unterseite mit einer geritzten, kursiven Besitzerinschrift versehen. Auf dem Scheitel l?ngs ein bronzener Bügel, der hinten bis nahe zum Nackenschutz gezogen ist, an beiden Enden durch einen Niet mit gro?em konischen Kopf befestigt. Quer dazu über dem oberen Teil der Kalotte ein eiserner Bügel, der durch einen Schlitz auf der Oberseite des Bronzebügels in Position gehalten wird. Vom Stirnbügel aus Bronzeblech links nur noch das Nietloch zur Befestigung und rechts ein Niet mit dem Ansatz des Bügels erhalten. Inwendig an den Seiten eiserne Scharnierlaschen mit einem Niet befestigt, welche mit den umgebogenen oberen Enden der Wangenklappen ein dreiteiliges Gewerbe bildeten. Nur die rechte Wangenklappe erhalten, unten mit ausw?rts gestelltem breiten Rand, vorne mit zwei Gesichtsauschnitten. Die Ohren durch die Wangenklappen vollst?ndig in den Ohrenausschnitt hinein abgedeckt. Die erhaltene Wangenklappe innen an vier Punkten modern befestigt. Kalotte und Wangenklappe von innen her mit Gaze und Kunststoff stabilisiert, eine Bruchstelle des bronzenen L?ngsbügels ebenfalls. L?nge ca. 29 cm, Breite ca. 19 cm, H?he ca. 29 cm. Sp?teste und am weitesten entwickelte Form r?mischer Helme in der Tradition der Exemplare, deren Kalotte aus einem Stück getrieben ist. Zum Zweck der Gewichtsreduzierung extrem dünne und leichte Wandung, welche durch die massiveren Kreuzbügel auf dem Oberteil in Bezug auf Stabilit?t und Sicherheit verst?rkt wurde. In der Zeit um 300 w?hrend der Tetrarchie durch neue, v?llig andere Konstruktionsprinzipien (Kammhelme mit mehrteiligen Kalotten) abgel?st. Provenienz: Aus dem Nachlass eines süddeutschen Militaria-Sammlers, erworben 2008 bei Hermann Historica (Auktion 54, Los 365). Zuvor Sammlung Axel Guttman (AG 543/H242), erworben 1994 in Krefeld. Publiziert in Junkelmann, "R?mische Helme. Sammlung Axel Guttmann VIII", 2000, S. 158 mit Abb. 81 und 82. A Roman bronze helmet of the Niederbieber type, 3rd century A.D. A Roman bronze helmet of the Niederbieber type, 3rd century A.D. A bronze bowl hammered in one piece, the sides with strikingly flared and stepped ear openings, the back pulled deeply downwards and provided with a neck guard sloping slightly downwards. The neck guard at the rim with heavy chipping, the underside with an incised, cursive owner's inscription. On the crest lengthwise a bronze stirrup, drawn close to the neck guard at the back, fastened at both ends by a rivet with a large, conical head. Transversely across the top of the calotte an iron stirrup held in position by a slot on the top of the bronze stirrup. From the frontal stirrup of sheet bronze only the rivet hole for fastening on the left and a rivet with the base of the stirrup on the right are preserved. Inside, iron hinge lugs attached to the sides with a rivet, which formed a three-part joint with the bent upper ends of the cheek flaps. Only the right cheek flap survives, with an outwardly set, wide rim at the bottom and two facial cutouts at the front. The ears completely covered by the cheek flaps into the ear cut-out. The preserved cheek flap modernly attached at four points on the inside. The calotte and cheek flap stabilised from the inside with gauze and plastic, a fracture of the bronze longitudinal stirrup as well. Length ca. 29 cm, width ca. 19 cm, height ca. 29 cm. The latest and most advanced form of Roman helmets in the tradition of examples with the bowl hammered out of one piece. Extremely thin and light wall for the purpose of weight reduction, which was strengthened in terms of stability and safety by the more massive cross-bars on the upper part. In the time around 300, during the Tetrarchy, replaced by new, completely different construction principles (ridge helmets with multi-part bowls). Provenance: From the estate of a South German military collector, acquired in 2008 at Hermann Historica (auction 54, lot 365). Previously the Axel Guttman Collection (AG 543/H242), acquired in 1994 in Krefeld. Published in Junkelmann, "R?mische Helme. Axel Guttmann Collection VIII", 2000, p. 158 with figs. 81 and 82. Condition: II - III

本场其它拍品

  • 竞价阶梯
  • 快递物流
  • 拍卖规则
  • 支付方式
竞价区间 加价幅度
0
10
100
50
500
100
1,000
200
2,000
250
5,000
500
10,000
1,000
20,000
2,000
50,000
5,000
100,000
10,000
+

价格信息

拍品估价:无 起拍价格:25,000 欧元  买家佣金: 25.00% + VAT

拍卖公司

Hermann Historica GmbH
地址: Bretonischer Ring 3 85630 Grasbrunn / Munich GERMANY
电话: +49 (0) 89-5472649-0
邮编: 80335
向卖家提问

小贴士

1. 一般拍卖公司接受的付款方式有以下几种:
现金、信用卡、转账汇款、银行支票、个人支票以及PayPal支付。
使用PayPal支付时,请留意需要在账单金额的基础上额外加上 4% 的手续费。
2. 信用卡的种类有以下几种:
3. 转账汇款时请注意银行手续费
海外拍企会要求足额到账,所以请您在汇款时,选择足额到账,或在汇款金额的基础上加上汇款手续费(如25美金)。
4. 国际转账汇款时, 您需要知道海外拍卖行以下汇款信息:
* 收款人名称
* 收款人地址
* 收款人银行账号
* 收款银行国际编码(8位字母数字组合,必填项, 如: BFKKAT2K)
* 收款银行清算码(9位数字组合,选填项)
* 收款银行名称
* 收款银行地址
5. 运输相关事项
有的海外拍卖行会替您安排和协调运输, 您只需要支付相关的运费及保险费(如您需要)即可;有的海外拍卖行会推荐几家长期合作的运输公司, 这些运输公司有着良好的信誉和高质量的工作效率,您大可放心。您只需要提供您的收货地址, 竞得拍品账单。 运输公司会根据您提供的信息给您报价, 您可以在其中选择最优的报价者来承担运输任务。然后就是付款了, 信用卡是最常用的支付手段, 当然还有其他像PayPal,转账等。
6. 进口通关可能出现的关税
国际运送的包裹在进口清关过程中如需支付关税,需由包裹接受人(即买家)自行承担。 征收标准:具体征收标准和额度以海关通知和解释为准。
7. 禁拍拍品
海外拍卖会可能会出现中国法律禁止交易的物品,如枪支、管制刀具、象牙、犀角等;中国买家不得通过本平台参与上述物品的拍卖活动;任何情形下,买家均须对自己的竞拍行为独立承担责任。
服务热线:400-608-1178
查看全部小贴士